Shop the best selection of Cadet CEC163TW – Energy Plus Electric Wall Heater – Complete Unit w/Thermostat, Multi-Volt. Shop by player, or browse by team to find the perfect item to cheer on your favorite D-backs. Whether you’re looking for the latest D-backs player product, be sure to check out the collection.
The Cadet CEC163TW – Energy Plus Electric Wall Heater – Complete Unit w/Thermostat, Multi-Volt have their own custom product that is made of 100% polyester and is a custom fit for their body. They also have official brand licensed product that are made of 100% cotton and are a standard fit.
Energy Plus
The smart choice for your comfort and your wallet, the Energy Plus uses up to 30% less energy than regular wall heaters. Say goodbye to temperature swings—intelligent controls and auto adjusting fan speed maintain room temperature within one degree. And control your comfort with a simple, built-in, backlit digital thermostat.
- Now with even quieter operation with new motor
- Use up to 30% less energy with automatically adjusting wattage and fan
- Easy, safe install – the smart sensor auto adjusts the heater voltage to match your 120, 208 or 240 volt power supply
- Easily upgrade: uses same wall can as Com-Pak series heaters so no wall patchwork or additional wall board cut outs are required
- Experience more comfort with precise, consistent temperature control and an auto adjusting fan speed that eliminates wide temperature swings
- Built-in digital thermostat with simple controls, a large digital display, and no complicated programming
- Night or Away button allows you to pre-set a secondary, lower temperature for nights or when you’re out of the room
- Keep the air circulating year-round with the fan-only mode
- Tamperproof settings let you set minimum and maximum temperature points
- Proudly made in the USA
- 5-year warranty
- ETL listed
Need help choosing the right heater for your room?
Click here to find the right voltage.
TECHNICAL INFORMATION
UL safety standards require the heater to be placed a minimum distance of 3/4 inches (1.9 cm) from adjacent surfaces and 4-1/2 inches (11.4 cm) from the floor. Cadet recommends a 12-inch clearance from all surfaces for longer and cleaner performance. A 3-foot (91.44 cm) minimum clearance is required for furniture or other objects placed directly in front of the heater. Install vertically. This heater is not approved for horizontal or ceiling installation. Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every six months minimum.
DIMENSIONS
Rough-In
8″W x 10-1/8″H x 4″D
Wall Can
7-7/8″W x 11-1/2″H x 4″D
Grill
9″W x 12″H x 5/8″D
SPECIFICATIONS
COLOR
White
WATTAGE
1000
1600
1500
AMPS
8.3
6.7
7.2
Downloads
720065 CE OG_web_English_12 3 18.pdf
5.18MiB
DOWNLOAD
720065 CE OG_web_French_12 3 18.pdf
4.99MiB
DOWNLOAD
Cadet Heat Energy Plus Gen II product sheet_2020.pdf
1.01MiB
DOWNLOAD
CCSM Surface Mount Wall Can Installation
807.98KiB
DOWNLOAD
Owners Guide Energy Plus (CE) mfg before 1-19-16
1.28MiB
DOWNLOAD
Parts Diagram Energy Plus (CE) mfg after 1-18-16
191.13KiB
DOWNLOAD
Parts Diagram Energy Plus (CE) mfg before 1-18-16
341.01KiB
DOWNLOAD
- Now with even quieter operation with new motor
- Use up to 30% less energy with automatically adjusting wattage and fan
- Easy, safe install – the smart sensor auto adjusts the heater voltage to match your 120, 208 or 240 volt power supply
- Easily upgrade: uses same wall can as Com-Pak series heaters so no wall patchwork or additional wall board cut outs are required
- Experience more comfort with precise, consistent temperature control and an auto adjusting fan speed that eliminates wide temperature swings
- Built-in digital thermostat with simple controls, a large digital display, and no complicated programming
- Night or Away button allows you to pre-set a secondary, lower temperature for nights or when you’re out of the room
- Keep the air circulating year-round with the fan-only mode
- Tamperproof settings let you set minimum and maximum temperature points
- Proudly made in the USA
- 5-year warranty
- ETL listed
Need help choosing the right heater for your room?
Click here to find the right voltage.
TECHNICAL INFORMATION
UL safety standards require the heater to be placed a minimum distance of 3/4 inches (1.9 cm) from adjacent surfaces and 4-1/2 inches (11.4 cm) from the floor. Cadet recommends a 12-inch clearance from all surfaces for longer and cleaner performance. A 3-foot (91.44 cm) minimum clearance is required for furniture or other objects placed directly in front of the heater. Install vertically. This heater is not approved for horizontal or ceiling installation. Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every six months minimum.
DIMENSIONS
Rough-In
8″W x 10-1/8″H x 4″D
Wall Can
7-7/8″W x 11-1/2″H x 4″D
Grill
9″W x 12″H x 5/8″D
SPECIFICATIONS
COLOR
White
WATTAGE
1000
1600
1500
AMPS
8.3
6.7
7.2
Downloads
| 720065 CE OG_web_English_12 3 18.pdf | 5.18MiB | DOWNLOAD |
| 720065 CE OG_web_French_12 3 18.pdf | 4.99MiB | DOWNLOAD |
| Cadet Heat Energy Plus Gen II product sheet_2020.pdf | 1.01MiB | DOWNLOAD |
| CCSM Surface Mount Wall Can Installation | 807.98KiB | DOWNLOAD |
| Owners Guide Energy Plus (CE) mfg before 1-19-16 | 1.28MiB | DOWNLOAD |
| Parts Diagram Energy Plus (CE) mfg after 1-18-16 | 191.13KiB | DOWNLOAD |
| Parts Diagram Energy Plus (CE) mfg before 1-18-16 | 341.01KiB | DOWNLOAD |
